Add: Floor Four,1# building,655-77 Qimin Road,Investment&Business Incubation Center,Yinzhou,Ningbo,China
|Product name : BE-STD-5’T5 adapter|
|Item : BE-5’ STD-RB|
Specifications of T8 to T5 retrofit kit
Features of T5 Retrofit kit
Why replace T8, T10, T12 lamp with this special T5 converter?
Here are the reasons:
1. Comparing with magnetic T8,T10,T12, it will save 35-50% electricity which save power bill by 35-50%.
2. No need to change anything on the original fixture.
3. Easy installation, the replacing procedures are the same as replacing a normal tube. Will much save the labor cost of Energy saving Lighting Reconstructing Program.
4. Power factor improved from 0.5(traditional magnetic ballast) to >0.98. The current decreases by 3-5 times which will help to reduce the wastage of electricity system and thus save energy.
5. Rapid start without flickering, even under low temperature or low voltage.
6. CRI>85, get better color performance.
7. High frequency electronic ballast, protecting eyes from 50Hz flickering of light caused by magnetic ballasts.
8. Noises free.
9. Reduce heat during operation. It indirectly saves energy because it helps to decrease the load of air-conditioning system.
10. Complete abnormal protection function prevent from burning on accident, life end or gas leak etc.
11. The fixture reflector can distribute the light to right direction, improve the system efficiency and then save more energy.
12. Nano technology
13. The lead and other plastic parts use resist burnt material, it can resist high temperature.
14. The lanthanide tricolor t5 lamp-house has high light effect, good rendering, long life, low spoilage, energy saving advantages.
15, port of loading: Ningbo
Advantages of T5 Tubes
Lamp Included: T5 (5/8in diameter) fluorescent lamp with a color temperature of 4100K (cool white) is included with each fixture (Option 2700K warm white, 6500K Daylight)
T5 fluorescents provide superior efficiencies of:
1. Less power consumption.
2. Less Greenhouse gas emissions.
3. Less maintenance.
4. Improved illumination.
5. Less over-all cost.
6. Avoid increasing the electricity bill
7. Environment friendly: T5 uses 3 mg mercury, T8 uses 9 – 12 mg mercury
Energy saving comparison between T5 and T8
Main Applications of T5 Adaptor
1. Shop display windows, hotels, restaurants and other interior lighting.
2. Exhibition hall, art room, museum, office, reading room and local lighting.
3. Atmosphere lighting for bars, discos, karaoke, etc.
4. Durability special ambient lighting.
5. Especially suitable for jewelry, gold ornaments and fashion closes lighting.
Caution: always be certain that the lamp is seated properly in both of its sockets. Be sure that both pins of each end are inside their respective socket and that the lamp is rotated 90 degrees once the pins are in the sockets. Failure to make good electrical contact between the pins and its socket may result in arcing and excessive heating of the socket.
How to replace/ use T8-T5 retrofit kit
1, Turn off power supply
2. Take away the T8 lamp
3, Take away the starter
4, Take away the rectify capacitor, if not, the power factor of the capacitor will be reduced to 0.5
5, Install the T5 lamp tube what in a same way of T8 lamp.
6, Turn on the power, then finish the installation.
|←[Previous : BE-5’ LP-RB] [Next : BE-4’ LP-RB]→|