Add: Floor Four,1# building,655-77 Qimin Road,Investment&Business Incubation Center,Yinzhou,Ningbo,China
BE-STD-T5 dimming light
|Product name : BE-STD-T5 dimming light|
|Item : BE-4’ STD-RB-E|
light source has no strip
1-10V input control
Dimming range: 1%-100%
Set-up procedure: either dimming position flicking when at 1S voltage preheating start, especially suit for the places where flourescent lamps are frequently used.
50% longer life than routine ballast.
60% power less when used in automatic lighting system.
So all the better energy electric light-dimming bracket lamp are provided with a control system, it is a specialized integrated type circuit, which is used to realize each electrode’s independent control.
The purpose to do this is to ensure that:
1, Dimming will not affect the life of light source.
2, Light source’s stable work when dimming.
3, Achievement of maximum energy saving in dimming process.
Cinema, School, office or conference room, hotel, club, house, restaurants, aisle, small stores and other illumination places.
The advantages of dimmable fluorescent lamp
2. Lighting effect 80% higher than average incandescent lamp and tungsten lamp.
4. capable of build Vicissitudinous lighting environment facing different time and occasions.
Dimming control method summarize
Wireless remote control-- besides possessing Infrared ray remote control's characteristics, it has remote distant control which can reach 50~100 meters, no direction. Shortcoming is weak anti-interference. Suit for grand auditorium, meeting room, cinema hall and other solo places.
DALI-adopt DALI's addressable digital light control system. DALI also support light attenuation, logarithm dimming, live scene and fault detect, lighting control interface standard. It is a popular lighting dimming system in the world currently because it has the advantages of good openness, flexible system reconfiguration, capable of cascade( make up of main/subsidiary system control), etc. This pattern of use can realize solo control of each independent ballast, its control content include: on/off control, dimming, group control dimming, detecting lamp's switch, luminance, abnormal and other conditions. Suitable for places where require of precise lighting control like hotels, blocks, important conference hall and other profession occasions.
Light modulator introduction
DC1~10V analog signal control light modulator introduction
Input voltage 110V-277V, output voltage DC 0-10V with switch, maximum switch current:1A, standard connection port，fit with national standard 86 panel, Size: 86*86*56mm. Combine with dimming ballast and LED dimmable driver, its connection can be easy and convenient，just need to spin, unlimited dimmer, no stroboscopic.
DC1-10v PORT multipurpose module dimming controller introduction
Application in intelligent houselights control system
110-277V AC ±10% 50/60Hz single phase power supply,current <0.1A
1Passageway 0/1-10V output control,Sink current >30mA, Source current >15mA,drivable
E- DIM series 0/1-10V more than 30 dimming ballast or LED driver
1Passageway 10A passive relay output,automatic cooperate with 0/1-10V output condition to accomplish on or off.
‧Native machine manual operation quick switch, able of
quick start or shut output.
‧At most 99 preset scene,16special effects and 16events.
‧Can set passageway's delay turn-off time and gradually lighting time, effectively protect lighting fixture's light source.
‧0/1-10V is linear dimming output, dimming range 0-100%,to fluorescent lamp,HID,LED,etc.
The dimming control of light source flicker free all the way.
‧LED status light,standard red or green,other colors for chosen.
‧One RJ12 fast network port，E-lighting NMP(RS485) or DMX512
(1990) serial interface.
‧Can use E-Lighting Designer V1.Above edition to programme.
‧Ambient temp -20---60°C max.
|[Next : BE-4’ LP-RB-E]→|
|Related Products :|